My guitar is humming after pickup replacement? help?

[dogfootblues]

Hey. just replaced my single coil telecaster neck pickup with a p-90. Guitar center wanted $150 to do it so i thought this would be a good time to learn how to change and sodder pickups myself. well i finally got the pickups to work again. im new at this so it took a couple tries. but not when i pug y tele in theres a really loud annoying hum. everythings grounded. i checked 5 times. my cables are good. do i need a new pot? if i do where can i can a whole new pot, switch and tele replacement kit thats really a step above a standard. thanks guys

[phungi]

Telecasters are known for creating a buzz due to static charge on the pickguard.

There are sites that discuss this, as well as fixes (like this)

I have a Tele knock-off that had the same problem, and I shielded it with a combination of copper tape and aluminum foil... problem solved.

[gimmesometruth27]

does it change with guitar volume increased or decreased?

in my experience p-90s are noisy and they do hum. if what was posted above does not work i would take it to some reputable repair shop to make sure you did everything correctly.

[dogfootblues]

Yes. I have my Fender Blues deluxe reissue on 1 and a half, whice is living room loud. My tele volume was at full. Both pickups are humming on all three spots on the switch. Now when i turn the volume down on my tele kinda very low, but still high enough to hear it, the hum seems to dissapear. So what the fuck man. I was pumped when i heard the p-90, now im fucking bumed. What next?

[All Those Yesterdays]

Take pictures of the soldering joints and post them...

Also do you happen to be in a room where their is a dimmer switch controlling the lights?

What happens with the hum when you rotated your body with the guitar?

[dogfootblues]

I just wanted to add that when the guitar is humming through the amplifier, when i touch the control plate, or the volume or tone knob the hum dissapears as well. i dunno, im taking the pics of the soldering joints now for you guys to look at

[dogfootblues]

How do i add pics to my post reply? im new at this

[dogfootblues]

http://s1144.photobucket.com/albums/o488/dogfootblues/

[dogfootblues]

Let me know guys if these pics arent good enough or close enough or the rite angle and ill take more and have them posted asap. what do u guys think?

[All Those Yesterdays]

Well the pictures are a bit small and blurry. It does appear there might be some cold solder joints.

[dogfootblues]

Just letting anyone to cares to know know that the problem wasnt in the soldering but in a faulty 3 way switch. A little rewire and set up from the Tech will do my little tele justice.